REQUEST A MEETING
ffly4u_logo
Twitter Linkedin Youtube
Creation of new KPI

Nexans
Detection of the plastic container life cycles
PIERRE FABRE AND A EU LOGISTICS LEADER
Skips filling rate

RECYCLING INDUSTRIES
Fly4u Nouveau Logo_blanc_avec_baseline

myDrum by

Edge AI Low Power®

Challenge

What business information is key for the cable industry?

The remaining cable length on a drum at the end of the site is a real KPI of the state of progress of the site allowing, among other things, to optimize the collection of empty or partially empty drums and in the latter case, to be able to reassign the residual lengths on another site.

What other information is needed?

To geolocalize the drums to optimize their use and protect against theft.

Solutions fly4u

Calculation of the residual length

Calculating a residual length of cable using a simple rev counter is not enough because the drums have several life cycles: unwinding, rewinding, rolling on the ground to be moved from point A to point B without being unwound or rewound, and transport.

The only way to meet this business need is to use the proprietary fly4u technology called “Edge AI Low Power®“. In other words, the integration of the technologies of Artificial Intelligence and Machine Learning in the device, capable of recognizing these different life cycles of the drum.

Geolocalization

Geolocalization is done thanks to a mix of technologies embedded in our device:

  • BLE (indoor)
  • WIFI (indoor, courtyard, urban environment)
  • GPS (outdoor).

New functions integrated into our services such as “message replay” and “inter-drums communication” allow to maximize the value.

Results

  • Real-time monitoring of site progress by a new KPI
  • Reduction of idle-times on construction sites
  • Reduction of drums management costs
  • Reduction of logistics costs related to cable reassignment
  • Huge gain thanks to a technological differentiation
Fly4u Nouveau Logo_blanc_avec_baseline

myRTP by

Edge AI Low Power®

Challenge

What business information is key for these industries?

Full/empty state : 

  • Detection of the “empty” state to know if the container is stored on site, unused and ready for return transport.
  • Detection of the “full” state to know how much time the sensitive goods are stored on site.

Washing time : 

The washing time measurement guarantees a high level of quality and allows to identify when a container is ready to be reintroduced into the logistics flow.

Whereas an unwashed container shows that there is still work to do and that the container can not be returned into the logistic chain.

What other information is needed?

  • Temperature control
  • Detection of shocks to identify possible breakage of liner
  • Geolocate container to avoid additional costs due to lost / stolen / idle status

Solutions fly4u

Detection of the empty/full state

Thanks to a 3D accelerometer integrated into the device, it is possible to measure movement of side walls.

Washing time measurement

Only “Edge AI Low Power®” (integration of Artificial Intelligence and Machine Learning in the device) makes possible to recognize the Karcher vibration on the container.

Shocks detection:

Our device integrates a 3D accelerometer to qualify shocks.

Temperature monitoring

A temperature sensor is integrated in the device. There are temperature alerts programmed to avoid damage of products due to too high/low temperature.

Geolocalization

Geolocalization is done thanks to a mix of technologies embedded in our device:

  • BLE (indoor)
  • WIFI (indoor, courtyard, urban environment)
  • GPS (outdoor).
  • LPWAN networks (reduced costs)

Results

  • Provide full transparency about position and status of your transported container and content
  • Increase the container turn rate between the different sites
  • Continuous connection between the container and its content for ETA and other services
  • Increase customer satisfaction by avoiding litigations
Fly4u Nouveau Logo_blanc_avec_baseline

mySkip by

Edge AI Low Power®

Challenge

What business information is key for the waste management industry?

The skips’ filling alert is a real KPI to monitor the recycling process, which makes possible to automate and optimize the logistics flows.

What other information is needed?

  • Geolocate the skips when they are at the dock (or not) with an accuracy of a few meters (the docks are very close to each other).

Solutions ffly4u

The filling alert

Through various technologies, fly4u solutions make possible to trigger skips’ filling alerts to redirect the skip to the discharge.

Geolocalization

Geolocalization is done thanks to a mix of technologies embedded in our device:

  • BLE (indoor)
  • WIFI (indoor, courtyard, urban environment)
  • GPS (outdoor).

Results

  • Increase in the skips turn rate
  • Monitoring of the skips state and maintenance
  • Optimization of the collection means
  • Improvement of the operational planning
  • Optimization of the service management
  • A more efficient service to users

Discover fly4u solutions for your business :

Contact us

Our Clients

fly4u

Contact us

Phone :
+33(0)5 61 24 80 90

Email :
contact@ffly4u.com

Address :
3 avenue Didier Daurat
31400 TOULOUSE
FRANCE

Twitter Linkedin Youtube

Newsletter

fly4u on Twitter

© ffly4u 2020